With all the painting done, the final parts were readied for assembly. Then it was time to break out the needle nose pliers and superglue!

The eye were painted from behind to give them a more realistic cat-like dome eye effect. The blood effect on the sword was created by slowly dripping a thickened liquid acrylic paint onto the surface in precise areas to get the bulging droplets.

Bracelets and necklaces were clasped on, with a few detail pieces such as the ear decorations glued into place.  The gem at the base of the sword is a re-purposed plastic coat button.

Here are some more details of the reverse side including the three circle necklace decoration meant to reflect the eye configuration and carry the three theme to the back.

A small felt pad was glued onto the underside of the figure to protect the figure and surfaces it might be resting on. Then it was carefully packed up into a big ole foam coffin for a journey to Hong Kong before eventually making it’s way back to LA for the show!

Why did it go all the way to Hong Kong first?…

…to serve as reference for a re-sculpted 4 -inch  edition that will be produced in multiples and available for sale from Playge next year! They did an amazing job reproducing even the tiniest details in an even smaller format. I can’t wait to see the finished pieces, I’ll be sure to keep you all updated!

Additional photos of the final 9-inch custom cat can be found in the catalog.

Time for some bling! A few small holes were drilled into the figure around the ankles and wrist to allow chain, wire and accessories to connect securely and seamlessly. At this point I assembled all of my metal pieces for placement and fitting. This was all done prior to painting so that threading chains and fitting roughed out sharp metal shapes wouldn’t ruin the finish.

That bling was a little too clean and shiny for my tastes, so into a bath of black paint it went! Most of the black paint was wiped off again, but it was enough to bring out the details while dulling the metal finish.

The accessories, links, chains and other decorative elements appropriately blackened and ready for final assembly.

The figure and skull accessory received airbrushed base coats of a semi-glass black and a matte cream color. As always multiple light coats of paint is the best way to go.

Semi-transparent red highlights were applied to specific areas of the figure to evoke the dark red stone often used for traditional spiritual statues.

Gold details were painted on and eventually given a dark wash like the accessories to bring out their details and add some age. I also started working on the plastic hemispheres that would become the eyes, luckily they fit almost perfectly within the existing sockets of the original eyes.

The skull got the same antique wash treatment along with a few bone color highlights.

Part 3: Assembly and a long journey

I often get requests to do some behind the scenes ‘making-of’ posts like I did for Milo & Ditch or the Android figures. They’re fun to do, and I managed to document the process of this particular project pretty well, so here we go again for my custom of Ferg’s Misfortune Cat for the recent show at Munky King.

One of the major inspirational design elements that Ferg brought to the original Misfortune Cat figure is the three eye configuration. This connected directly to my love and respect for traditional Tibetan and Indian Buddhist artwork in which the three eye design nearly ubiquitous.

After a few hours with my book collection and a trip to the excellent Rubin museum here in New York , I decided to draw my inspiration from the group of deities known as Enlightened Protectors (which includes Mahakala shown above).

Many of these images incorporate skulls as decorative elements, usually in some sort of headgear or necklace. I wanted the skull to hold a more prominent position, so I replaced what would have been the traditional lucky cat coin (or misfortune coin in this case!) with a larger accessory skull.

I started with half a styrofoam ball roughly sculpted into a skull shape to provide a base.

I wanted to carry the “three” theme throughout the piece, so I sculpted a third ear out of two-part resin directly onto the figure behind and between the original ears.

I continued that theme with the nose area of the skull. Here the foam has been covered in clay and had the details sculpted in. It has been baked solid and is ready for a little sanding/polishing.

Using the same clay as the skull, facial features are roughed in directly on the base figure. I used a small cut paper template to help keep the details on either side of the face somewhat even.

The sword needed to be extended and expanded, so I built a wire mesh framework around the remains of the original. Working a thin layer of resin into the framework provided a solid, connected foundation to sculpt the final blade.

The giant hole I cut out of his belly was filled in and sculpted to fit the skull accessory into the indent.

The skull sits snugly against the body, but it can also be easily removed to sit on its own. I had to do a lot of back and forth sculpting/fitting/fixing to get a really good fit. In the background left here you can see the original eyes that I removed, and three different tongue sculpts that I was torn between.

And here we are all primed up and ready for paint!

“>
Next time: Bling and Paint.

Well the cat is (literally) out of the bag! Ferg’s 9″ Misfortune Cat from the Playge line gets the custom treatment from a talented lineup of artists including Chris Ryniak, MCA , MAD and more! Unfortunately I will be unable to make it in person due to New York Comic-Con, but if you are on the west coast, be sure to stop by. More pics and maybe a behind-the-scenes for kitty in the week after the show.

Oh and keep 3 eyes out for a 4″ production version of this guy!

Show opens October 8th

Munky King
7308 Melrose Ave.
Los Angeles, CA 90046
323.938.0091

p.s. if you want to know if i ever make a print of this and you’re not a regular visitor, why not sign up for the newsletter?

I sat down to draw some creatures and my cat wouldn’t be quiet so I ended up drawing another ugly cat. That shut him up.